I'm on vacation from work this week so I've been able to get quite a few hours of work in the shop. The base for this table is from a big maple tree my next door neighbor had cut down to put a pool in. I cut mortise and tenon joints for the leg-to-foot joint, which I will also draw-bore, and a notched bridle joint for leg-to-brace joint.
Yesterday I started preparing to make the top for my trestle table.
A few weeks ago I brought some boards down from the attic to give them time to aclimate to my shop. My cherry log has been drying for about a year and the 4/4 stock is down to about 10% moisture content now.I trimmed the sap wood off of three of the boards from the tree and cut off the end where the tree started to bend. That left me with 8' boards. The final table length should be about 84" so I've go a little to play with still.